 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TES 2H Series, 2 Watt Features Small SMD package with standard footprint I/O isolation voltage 1500 VDC Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80% Operating temperature range -40 to +75C High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D Available in tape and reel package 3-year product warranty With their small footprint these 2 Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Ordercode TES 2-0510H TES 2-0511H TES 2-0512H TES 2-0521H TES 2-0522H TES 2-0523H TES 2-1210H TES 2-1211H TES 2-1212H TES 2-1222H TES 2-1223H TES 2-2410H TES 2-2411H TES 2-2412H TES 2-2422H TES 2-2423H http://www.tracopower.com 24 VDC 10% (24 VDC nominal) 12 VDC 10% (12 VDC nominal) 5 VDC 10% (5 VDC nominal) Input voltage Output voltage 3.3 VDC 5 VDC 12 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 12 VDC 15 VDC Output current max. 500 mA 400 mA 165 mA 200 mA 83 mA 66 mA 500 mA 400 mA 165 mA 83 mA 66 mA 500 mA 400 mA 165 mA 83 mA 66 mA Efficiency typ. 70 % 73 % 77 % 74 % 76 % 76 % 72 % 75 % 79 % 80 % 80 % 72 % 75 % 79 % 79 % 79 % Page 1 of 5 DC/DC Converters TES 2H Series Input Specifications Input current no load / full load 5 Vin; 3.3 VDC model: 5 Vin; other models: 12 Vin; 3.3 VDC model: 12 Vin; other models: 24 Vin; 3.3 VDC model: 24 Vin; other models: 60 mA / 470 mA typ. 60 mA / 540 mA typ. 30 mA / 190 mA typ. 30 mA / 210 mA typ. 15 mA / 95 mA typ. 15 mA / 110 mA typ. 2 Watt Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. 0.3 A max. internal capacitor see graphs below 1 % max. 1.2 % / 1 % change Vin see graphs below 120 mVpp max. 0.02 %/K max. limited 0.5 sec. max. 3.3 & 5.0 VDC models: 47 F max. 12 & 5 VDC models: 10 F max. (each output) 12 & 15 VDC models: 4.7 F max. (each output) - Operating - Storage - Case -25C to +75C with no derating -25C to +125C 95C max. 95 % rel. H max. >2'000'000 h 1500 VDC 60 pF typ. >10 Gohm 50 to 120 kHz (depending on load) - Input variation - Load variation Reverse voltage protection Input filter Output Specifications Voltage set accuracy Voltage balance (dual output models, balanced load) Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Short circuit protection Capacitive load General Specifications Temperature ranges Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217F, at 25C, ground benign) I/O-isolation voltage (60 sec) I/O-isolation capacity (100 kHz, 1 V) I/O-isolation resistance (500 VDC) Switching frequency Output voltage variation dependent on load (at nominal input voltage) 3.3 & 5.0 VDC models: other models: Deviation of Vout nom. Deviation of Vout nom. +20% +15% +10% +5% 0% -5% -10% 0 20% 40% 60% Output Load 80% max. typ. min. 100% +20% +15% +10% +5% 0% -5% -10% 0 20% 40% 60% Output Load 80% max. typ. min. 100% All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 5 DC/DC Converters TES 2H Series General Specifications Casing material Weight Lead-free reflow solder process Moisture sensivity level plastic (UL94V-0 rated) single output models: 1.5 g (0.05 oz) dual output models: 2.2 g (0.08 oz) as per IPC J-STD-020D MSL report level 2 as per IPC J-STD-033B 2 Watt Outline Dimensions Single Output Models (0.35) 0.30 (0.01) S 8.9 Pin-Out Pin Single -Vin (GND) +Vin (Vcc) -Vout +Vout No con. 1 0.25 3.04 (0.12) (0.10) 2.54 (0.20) 5.08 1.5 (0.06) 0-4 6.15 (0.24) (0.48) 6.15 (0.24) 12.3 1.0 2 4 5 8 (0.04) 8 5 (0.37) 1 2 0.6 (0.02) 13.7 (0.54) 4 9.3 Solder Pad (0.64) 2.54 Dual Output Models 13.1 (0.52) No con. = Pin to be isolated from circuitry 1.6 (0.06) Pin-Out (0.35) 0.30 (0.01) S Pin 1 2 4 0.25 Dual -Vin (GND) +Vin (Vcc) Common -Vout +Vout No con. 8.9 3.04 (0.12) (0.10) 2.54 (0.20) 5.08 (0.10) 2.54 1.5 (0.06) 0-4 6.15 (0.24) (0.48) 6.15 (0.24) 12.3 1.0 5 7 10 (0.04) 10 7 (0.37) 1.6 (0.06) No con. = Pin to be isolated from circuitry Solder Pad 13.1 (0.52) 9.3 1 2 0.6 (0.02) 16.3 (0.64) 4 5 (0.64) 2.54 Dimensions in [mm], () = Inch Pin pitch tolerances: 0.13 (0.005) Other tolerances: 0.25 (0.01) http://www.tracopower.com Page 3 of 5 DC/DC Converters TES 2H Series Packaging: Single Output Models Standard Packaging - Tube - 1 Tube contains 10 converters 10.5 9.7 14.2 10.2 175.0 { 2.0 2 Watt 3.7 R0.7 2.9 7.0 3.6 0.8 Optional Packaging - Tape & Reel - Specifications according IEC 286-3 - 1 Reel contains 350 converters - Use appendix -TR on order code 29.0 +1 2.0 -0 330.0 1. 5+ -0 0.1 1.75 4.0 A 0.5 { 0.05 2.0 1.7 3.5 24.0 { 0.03 11.5 13.0 20.0 B A B 9.5 SECTION B-B 10 3.5 SECTION A-A 0.6 8.5 9.55 12.55 1.5 2.0 50 Dimensions in [mm], Tolerance 0.1mm http://www.tracopower.com Page 4 of 5 6.3 100.0 13.0 { 0.25 DC/DC Converters TES 2H Series Packaging: Dual Output Models Standard Packaging - Tube 1 Tube contains 10 Converters R0.7 2.9 10.5 9.7 14.2 10.2 175.0 { 2.0 2 Watt 3.7 7.0 3.6 0.8 2.0 Optional Packaging - Tape & Reel - Specifications according IEC 286-3 - 1 Reel contains 350 converters - Use appendix -TR on order code +1 -0 37.0 330.0 1. + 50 -0 .1 1.75 4.0 2.0 A 0.5 { 0.05 14.2 32.0{ 0.3 1.7 28.5 15.5 4.45 50 M 20.0 A 9.5 SECTION B-B R0 .7 5 SECTION A-A 10 50 3.5 0.2 0.6 8.55 9.55 1.5 2.0 12.55 M: partial enlargement Specifications can be changed any time without notice. Dimensions in [mm], Tolerance 0.1mm Rev. 05/09 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com 1.7 B B 4.0 Page 5 of 5 10 13.0 0.25 100.0 |
Price & Availability of TES2-2410H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |